|
|
Scupper Pup
|
|
List Price: $119.95
Your Price: $99.95
You Save: $20.00
Item Number: 30023
|
Scupper Pup fits almost all sit-on-top kayaks because it has two crossbars. One set adjusts from 6”- 11” while the other slides from 11”- 18”. An Allen wrench is provided for crossbar switch outs. Scupper Pup carries up to 200 pounds on its 10” x 4” pneumatic tires which release by pulling a cotter pin.
Scupper Pup Assembly Directions:
|
Slide crossbar tubes together leaving foam padding on bars. To hold tubes in position, allow snap button to emerge from one of the holes in crossbar. Some holes may be hidden beneath foam padding. Judge which hole to use by the distance between drainage holes in your kayak, if possible. Holes on crossbar and holes in kayak may not align. To release snap button, twist cart frame clockwise. Then slide crossbars to match holes in kayak without use of snap button. Snap button is not necessary to have cart function properly. Slip the foam pad over the joint of the tubes. A little ArmorAll on tubes may help (do not use oil).
 |
Attach wheels as illustrated. |
The Scupper Pup is supplied with the 11"- 18" crossbar in place. You may find your boat scupper holes need the shorter crossbar set which is included (6"- 11"). To change crossbars, transfer snap button from long crossbar to shorter one. Manually turn thumb screws holding crossbar to stainless steel T-fitting. DO NOT loosen screws securing T-fitting to upright bars. Slide out long tubes from T-fitting and replace with shorter tubes with snap button inserted. Align thumb screws with holes in crossbars. Tighten thumb screws by hand FIRMLY. Continue assembly as in first step.
Placing Scupper Pup on Your Boat
|
|
|
|
|
 |
 |
- With boat lying flat, choose scupper (drainage) holes you want to use. Adjust Scupper Pup upright bars so bars will pass through those drainage holes.
- Stand next to boat slightly behind the scupper holes you will use. Roll boat over and balance it on its side, propping it up with your leg if necessary.
- Slide Scupper Pup's upright bars through scupper drainage holes. Roll boat back onto Scupper Pup wheels.
You are now ready to pull or push your boat to the water. Upright bars may tilt toward you when you pull or tilt away from you when you push the boat. This is normal. | | |
Product Reviews
|
|